Call Home Comfort Experts at 255-4600 Mishawaka/SouthBend 621-5000 Elkhart 684-1800 Nilesfor all of your air conditioning, heating and indoor quality needs.

Join our Service Club Membership

A Planned Service Inspection Agreement is the way to keep your air conditioning, heating and indoor air quality equipment operating at peak efficiency saving you money for years to come. A system that receives our regular maintenance experiences fewer breakdowns and can save you large repair costs annually. Safety is also a key benefit of a well maintained system. A neglected gas furnace could emit carbon monoxide, a colorless odorless gas that kills many each year. Dirty electrical connections, dirty filters, inoperable safety switches can all lead to trouble. If you don't join the club to save money and extend the longevity of your equipment, do it for your health and well being!

Membership Programs, Platinum, Gold and Silver Memberships available.  Guaranteed appointments, savings on air conditioning services and maintenance, discounts on new air conditioner installation

Here's what you get when you join the club:

  • Two Visits - per year, one for the air conditioning, and one for the heating.
  • Priority Service - we put you at the front of the line.
  • Value Rate Prices - on any repair. (You save 10% - 15%)
  • Discount Service Call Rate – If you need us anytime throughout the year, you get a lower rate than non members.
  • Free Reminders – We'll remind you when to schedule.

Service Club Membership checkpoints are available on each piece of equipment contracted for:

Air Conditioners/Heat Pumps
  • Refrigerant Pressure
  • Electrical Connections
  • Relays
  • Proper Voltage
  • Filters
  • Flush Outdoor Coils (As needed)
  • Lube Motors
  • Clean Condensate line
  • Refrigerant Leaks
  • Temperature Drop
  • Humidifier Off
  • Fuses and Disconnect
  • System Operation
Humidifiers *
  • Disassemble and change water panel
  • Clean drain holes
Air Cleaners (HEPA and Media)
  • Replace media/Filters *
  • Check for proper air flow
  • Check motor operation on HEPA
Gas Furnaces
  • Lube Motors
  • Draft/Flue Pipe
  • Filters
  • Pilot Flame
  • Gas Input
  • Humidifier On
  • Visible Cracks in Heat Exchanger
  • Pulley & Belt
  • Limit Switch
  • Safety Controls
  • Dampers
  • Moisture in Flue
Air Cleaners (Electronic)
  • Remove and wash cells
  • Reinstall cells, customer to turn unit on after cells dry
UV Disinfection Systems *
  • Check for 24/7 operation
  • Replace lamp module (1x per year)
*If added to your membership plan